Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance - TECO 100 Variant Betriebs- Und Wartungsanleitung

Vorschau ausblenden Andere Handbücher für 100 Variant:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 81
- Make sure that the wheel on which the tyre has been mounted is firmly secured to the turntable
using the centring handle 1 fig. 34. Also make sure that the tool-carrying head and the bead breaking
unit are well clear of the working area, if possible in a rest position.
- Connect the Doyfe inflator chuck 22 fig. 34 on the air hose to the air chamber valve stem, after
removing the cap. Inflate the tyre by pressing the corresponding Pedal 14 fig. 34 at short periods
of time.
The inner tube gradually expands inside the tyre. As this happens, push in the inner tube valve to
let out the air left between the tube and the tyre; this prevents deflation and any possible damage
to the tube.
- Inflate, taking utmost care that the pressure shown on the Pressure gauge display 17 fig. 34 NEVER
exceeds the pressure levels recommended by the tyre producer.
- Fit the cap to the valve to protect its internal mechanism from dust and ensure an airtight seal.
- Remove and unload the wheel as described in steps 11-12 of the "TYRE MOUNTING" section.
CAUTION
The "Spare parts" handbook does not authorize users to carry out work on the machine with the
exception of those operations expressly described in the user manual. It only enables users to
provide the technical assistance service with precise information in order to minimize delays.
WARNING
The manufacturer declines all liability for claims deriving from the use of non-original spare
parts or accessories.
CAUTION
Any operation intended to modify the setting value of the relief valves or pressure limiter is forbidden.
The manufacturer declines all liability for damage resulting from tampering with these valves.
WARNING
Before proceeding with any adjustment or maintenance activity, disconnect the machine from
the air supply and electrically insulate the machine by means of an omnipolar disconnection
device. make sure that all the mobile parts are locked.
CAUTION
In case of replacement of the power supply cable, follow the indications listed in the table
below for the most appropriate cable choice:
48
Inflating tube-type tyres

mAINTENANCE

User manual TECO 100 Variant

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis