Stryker Power-PRO TL Bedienungs- Und Wartungshandbuch Seite 16

English
HEAD END AND FOOT END FASTENER INSTALLATION (MODEL 6388 AND 6389) - CONTINUED
INSTALL BOTH FASTENERS - CONTINUED
7. Repeat steps 2 - 4 to install the head end fastener on the floor track (Figure 10).
Foot End Fastener
Foot End
8. Confirm fastener spacing as shown in Figure 11.
Foot End
9. Adjust the track mounted fasteners (NMI adaptors), as needed to fit into the tracks, by loosening the two wing nuts
on either side of the fastener that attach the locks to the lock down base plate.
Track Mounted Fasteners (NMI Adaptors) supplied by NMI Safety Systems.
Return To Table of Contents
1-16
Cot Fastener Installation
Head End Fastener
Figure 10: Head End and Foot End Fastener - Floor Track Installation
Figure 11: Fastener Spacing
6385-009-005 REV B
948 MM
Head End
Head End
www.stryker.com