Power Connector And Pin Out; Fuse Replacement - NDS 43'' RADIANCE G2 Bedienungsanleitung

Power Connector and Pin Out

Power Connector Fuse Replacement
A
B
C
Pin Name
Top Line
Mid Gnd
Bottom Neutral AC return

Fuse Replacement:

1. Disconnect the power cord
2. Using a small screwdriver, gently pry open the door
(A) that covers the fuse carrier (B).
3. Use the screwdriver to pry the fuse carrier (B) out of
its well (C.).
4. Identify and remove the failed fuse.
5. When installing a new fuse*, make sure that one end
of the fuse touches the back of the carrier as shown
in (B).
* Fuse information:
Cooper Bussmann, S506-5A, 5A, 250V, time delay
Description
AC Source
Ground
20