Display Setup; Hd-Sdi Picture Menu; Sd-Sdi, S-Video And Composite Picture Menu - NDS 43'' RADIANCE G2 Bedienungsanleitung

Display Setup

HD-SDI Picture Menu

SD-SDI, S-Video and Composite
Picture Menu
Horizontal Position (SD-SDI, S-Video and Composite only):
This control is disabled when
Moves the image to the left or right. Press ◄ or ► to horizontally center the image.
Vertical Position (SD-SDI, S-Video and Composite only):
This control is disabled when
Moves the image up or down. Press ◄ or ► to vertically center the image.
Sharpness:
Press ◄ or ► to adjust the sharpness (focus) of the displayed image.
Overscan:
0 = The image is displayed at a size that fills the screen without losing any video information. The image
presented to the display may include black bars top and bottom or left and right.
1, 2, 3, 4, 5 or 6 = The image is linearly enlarged, while remaining centered, in incremental steps. As the
image becomes larger video information will be lost from the top and bottom and / or left and right.
Select using ◄ or ► buttons.
Aspect (SD-SDI, S-Video and Composite only):
Pressing the ◄ or ► button changes the aspect ratio of the image from 4:3 to 16:9 or from 16:9 to 4:3.
Note: Displaying a 4:3 image in 16:9 causes its elements stretched horizontally. Likewise, displaying a 16:9
image in 4:3 causes its elements to be compressed horizontally.
Mirroring:
Pressing the ◄ or ► button presents the displayed image swapped from right to left and displays a
mirroring indicator in the lower right corner. Pressing the ◄ or ► button again returns the image to its
normal left to right orientation and removes the mirroring indicator.
Overscan is set to 0.
Overscan is set to 0.
10