Control; Quick Select - NDS 43'' RADIANCE G2 Bedienungsanleitung

Control

A 6 button keypad, located bottom center on the front of the display, allows the user to make adjustments
to various display parameters using the On Screen Menu (OSM) system. To display the standard input
menu, press the INPUT button twice.
4

Quick Select

The QUICK SELECT menu, shown below, is displayed when the keypad's INPUT button is pressed once. If
the current input is one of the five shown in the QUICK SELECT menu, it will be illuminated. Select one of
these inputs by pressing the keypad button under the QUICK SELECT key that points to it. For example: To
select DVI-1, press the MENU button under the DVI-1 label. If a selection is not made the QUICK SELECT
menu closes after 10 seconds. The QUICK SELECT menu closes 30 seconds after the last selection is made.
Quick Select changes only the Primary input. If a Secondary input is being displayed and the input chosen
with Quick Select is the same as the Secondary input, then the PIP image will be cleared and the chosen
input will become the Primary input.
Accessing the full input menu is described on page 7.
4