Anslutningspaneler - NDS 43'' RADIANCE G2 Bedienungsanleitung

Anslutningspaneler

Notes
1. An S-Video signal may be applied via 2
or a DIN 4 terminated cable, but not both.
2. DVI 1 IN 1920 x 1200
3. 3G-SDI 1 and 3G-SDI 2 accept
4. An RGBS, YPbPr or VGA signal may be applied via the DVI 2 connector or the R / Pr , G / Y / SOG 2, B /Pb
and HS / C-SYNC BNC
sync.
5. Set the REDRIVE switch to
display. The REDRIVE switch is set to
second display.
6. DVI 1, 3G-SDI 1 and S-VIDEO re-drives are always active when the display is powered on.
7. FIBER OPTIC (90R0053 only) and DVI 1 inputs may be connected simultaneously, but may not be
displayed simultaneously.
8. The ND-OS connector is used for installing
controlling the display. See
BNC
maximum resolution. DVI 2 IN
3G-SDI signals. The provided accessory cable is not
connectors. The VS BNC
Off when the RGBS
On when the
BIOS
Communication Port
FIBEROPTIK
terminated cables to the Y and C labeled
1920 x 1080 maximum
is used when the applied signal has both
and YPbPr signals will not be daisy chained to another
RGBS and YPbPr
upgrades. The ND-OS connector may also be used for
on page 14.
STRÖMBRYTARE PÅ/AV
BNC connectors
resolution.
3G-SDI compliant.
H sync
signals will be daisy chained to a
3
and V
2