Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DMX operation
Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 8 control channels.
However, it can also be switched to a mode with 1, 3, 4, 5 or 7 channels if different functions are required. To
be able to operate the device with a DMX controller, the DMX starting address must be set. The starting
address depends upon which DMX controller is being used. Please refer to the controller's documentation.
1
Press the button MENU so many times until the menu structure is indicated in the display. Use UP and
DOWN to select DMX. Confirm 2 x with the ENTER button.
2
The display indicates Address and Channel. Use the UP and DOWN buttons to select Channel.
Confirm with ENTER.
3
The display indicates 1 CH (1 DMX channel), 3 CH (3 DMX channels), 4 CH (4 DMX channels), 5 CH (5
DMX channels), 7 CH (7 DMX channels) or 8 CH (8 DMX channels). Use the UP and DOWN buttons to
select the desired number of DMX channels. Confirm with ENTER.
4
Use the UP and DOWN buttons to select Address. Confirm with ENTER.
5
Now the display indicates the menu item for the DMX start address. Use the UP and DOWN buttons to
set the address. Confirm with ENTER.
6
When receiving DMX signals, the DMX address in the display lights green. If no control signals are
available, the DMX address lights up red.
7
You can adjust the behavior in case of missing DMX signal in the system settings under the menu item
SETTINGS > DMX Fail: HOLD = Most recent DMX value is held or BLACK = LEDs are switched off.
Note: Please make sure you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture in the DMX chain. If several devices are addressed similarly, they
work synchronically.
4
3
Functions in DMX mode
Mode/Modus/
Channel/Kanal
1
3
4
5
7
CH
CH
CH
CH
CH
1
1
2
6
2
Value/Wert
8
CH
Dimmer intensity
0
255 Gradual adjustment of the dimmer intensity from 0 to 100 %
Automatic / sound programs
No function
0
14
(in 7 channel mode the channels 1-5 available only
if is set to a value 0-14)
15
24
Automatic program 1
25
34
Automatic program 2
35
44
Automatic program 3
45
54
Automatic program 4
55
64
Automatic program 5
65
74
Automatic program 6
The LED-Spots of the device are arranged in
the following order (see graphic) and can be
individually controlled with the following DMX
protocol.
1
Function/Funktion
28/32
00127688, Version 1.0
Werbung
Inhaltsverzeichnis
