Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DMX-CONTROLLED OPERATION
You can control the devices individually via your DMX-controller.
DMX-Mode
The device has two different DMX channel modes. The Control Board allows you, as described below, to
assign the DMX channel mode.
Addressing
Press the MODE button until the display shows Addr. Press ENTER to confirm. You can now set the desired
address via the UP or DOWN buttons. Press ENTER to confirm. The Control Board allows you to assign the
DMX fixture address, which is defined as the first channel from which the device will respond to the
controller.
Please, be sure that you don't have any overlapping channels in order to control each device correctly and
independently from any other fixture on the DMX-chain.
If several devices are addressed similarly, they will work synchronically.
Controlling:
After having addressed the LED FE-700 Flower effect, you may now start operating it via your lighting
controller.
DMX protocol
10 channel mode
Channel
1
2
3
4
5
6
7
Strobe
8
Rotation
9
Program by DMX
10
Speed by DMX
Value
0-255
Red
0-255
Green
0-255
Blue
0-255
White
0-255
Amber
0-255
Pink
0-10
No function
11-255
Strobe with increasing speed
0-9
No rotation
10-127
Clockwise rotation with increasing speed
128-138
No rotation
139-255
Counter clockwise rotation with increasing speed
0-9
No function
10-200
Auto program by DMX
201-255
Sound program by DMX
0-255
Auto program with increasing spead
25/28
Function:
00091062.DOC, Version 1.1
Werbung
Inhaltsverzeichnis
