Dip Switch Controlled Operation; Auto Mode; Sound Control; Dmx-Controlled Operation - EuroLite LED FLD-252 RGB Bedienungsanleitung

DIP Switch controlled operation

Auto Mode

In order to select Color change and Color fade, set dipswitch 9 and 10 to OFF. Set dipswitches 1 – 6 to
OFF as well.
Speed can be adjusted via dipswitches 7 and 8.
In order to select Static colors and flash, set dipswitch 9 and 10 to OFF. Set dipswitches 7 and 8 to OFF as
well.
Dipswitch 1 to 3 control the color settings.
Dipswitch 4 to 6 control the flash settings.

Sound Control

In order to select Sound controlled color change, set dipswitch 9 to ON and dipswitch 10 to OFF.

DMX-controlled operation

You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
Addressing the Projector
Set the dipswitches 1 and 10 to ON. (This setting is also used to determine the Slave device).
Controlling:
After having addressed all LED FLD-252 RGB 10mm Floods, you may now start operating these via your
lighting controller.
18/20 00081676, Version 1.1