Remote Control With The Foot Pedal Fp-1; Operation Via Dmx Controller; Setting The Dmx Starting Address And Selecting The Dmx Operating Mode; Dmx Protocol - EuroLite LED KLS-1001 Bedienungsanleitung

7.2 Remote control with the foot pedal FP-1

The foot pedal available as accessory allows convenient control of the light set.
1
Press pedal 1 PRESETS repeatedly for the desired function. One in seven preset colors or color
change and color fade of the colors can be selected.
Number
1
2
3
4
5
6
7
8
9
2
Press pedal 2 SOUND CONTROL to select sound control.
3
Press pedal 3 FREEZE to select the freeze function. Then the current color is kept.
4
Press pedal 4 BLACK OUT to switch off all LEDs.
5
After switching the light set off and on again, the function selected last is activated.

7.3 Operation via DMX controller

For operation with a controller with DMX512 protocol, the light set is equipped with 15 control channels.

Setting the DMX starting address and selecting the DMX operating mode

1
To be able to operate the light set with a DMX controller, the DMX starting address must be set for the
first DMX channel. For this press the button MENU so many times until
display. Then use the buttons UP and DOWN to set the address.
Note: The starting address depends upon which DMX controller is being used. Please refer to its user manual.
For operation with the DMX control panel DMX LED Operator 4 or the infrared system DMX LED Operator IR2DMX
adjust the DMX starting address 021.
2
To switch to the DMX operating mode, press the button MENU so many times until the display indicates
. or
the light set can be operated with the DMX controller.

DMX protocol

Channel 1 – Preset programs, automatic mode, sound control
DMX value
000 – 009
010 – 029
030 – 049
050 – 069
070 – 089
090 – 109
110 – 129
130 – 149
150 – 169
170 – 189
190 – 209
210 – 229
230 – 249
250 – 255
Function
white
red
green
blue
cyan
yellow
purple
color change every second
color fade every 3 seconds
. Then press the button UP. The display will indicate
Function
Off
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Program 7
Program 8
Program 9
Program 10
Program 11
Automatic mode
Sound control
28/31
is indicated in the
and after a few seconds
00056665.DOC, Version 1.2