Kärcher WRS 200 Handbuch Seite 22

5 WRS 200 device overview
Burner sight glass
1
Battery
2
Dosing pump
3
RM 110 container system care
4
Water filter
5
Fuel canister
6
High-pressure hose storage compartment
7
Control panel
8
Burner blower
9
Pressure control
10
Filler opening lid
11
High-pressure pump
12
Oil level sight glass
13
Note
Please note: All types of fuel are simply referred to as "fuel"
in these operating instructions.
22
6 Requirements for operating the WRS
200
 A suitably large water tank should be available in order
to use the WRS 200.
 The water tank must be safely fastened to the rear of the
vehicle.
 Attention must be paid to the maximum permissible
weight and permissible axle loads of the vehicle when
selecting the water tank.
 When the WRS 200 is mounted on the rear of the vehi-
cle, a counterweight must be mounted on the front bar
of the WR 100 Adv (weed elimination accessory) or an-
other suitable counterweight must be mounted.
 According to the attachment guideline, the outer edges
must not protrude more than 400 mm beyond the con-
tour of the vehicle. This is not conformant when no ad-
ditional attachments are mounted (not permitted).
English