Initializing Disaster Alert Calls; Exiting Emergency Operations; Repeater Mode; Figure 7: Repeater Mode Operation - Motorola MTP3250 Funktionsbenutzerhandbuch

68015000899–FC (en-US)
Chapter 3: Modes
3.5.11.1

Initializing Disaster Alert Calls

Procedure:
1 From the home screen, press the Menu key.
2 Select Services → Disaster Alert.
Your radio enters Disaster Alert Mode and it displays Disaster Alert icon.
3 To start the call press PTT.
Your radio displays Disaster Alert In Use.
3.5.12

Exiting Emergency Operations

Prerequisites: Make sure that your radio is engaged in Emergency Operations.
Procedure:
1 If your radio screen displays Emergency Mic On, press End.
2 Press and hold Exit.
NOTICE: If an Emergency Operation triggered by Emergency number (not by
Emergency button), you can press the End key to exit the Emergency Operation.
Your radio exits Emergency Operations.
3.6

Repeater Mode

NOTICE: This feature is a paid feature.
The Repeater Mode provides repeater connectivity between radios operating in the DMO Mode.

Figure 7: Repeater Mode Operation

A DMO repeater is used to extend the DMO range by retransmitting received information from one
radio to another. It retransmits group calls, private calls and data on a given frequency. In the diagram
above the radio in the middle is a repeater.
58
DMO DMO
Send Feedback