Notes On Safety - Aventics CD01-PA Betriebsanleitung

AVENTICS | CD01-PA | R499050037–BAL–001–AH | English
English
1 About This Documentation
Documentation validity
This documentation applies to the following configurable
valve systems in accordance with ISO 15407-1:
Designation
CD01-PA
This documentation is intended for installers, operators,
and system owners. These instructions contain important
information on the safe and appropriate assembly,
operation, and maintenance of the CD01-PA valve system
and how to remedy simple malfunctions yourself.
O Read this documentation completely, especially the
chapter "2 Notes on Safety" before working with the
CD01-PA valve system.
Required documentation
The CD01-PA valve system is a system component. Also
observe
W
the instructions for the other system components,
W
the system documentation from the system
manufacturer and
W
if using a field bus connection, the operating
instructions for the bus coupler.
Presentation of information
Safety instructions
This documentation contains safety instructions before
any steps that involve a risk of personal injury or damage
to equipment. The measures described to avoid these
hazards must be observed.
Safety instructions are set out as follows:
Type and source of risk
Consequences
O Precautions
Indicates a hazardous situation which, if not avoided,
will certainly result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Electric version
Without electrical connector
With electrical connector
VDS bus coupler
M12 contact bridge
SIGNAL WORD
DANGER
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in minor or moderate injury or
damage to equipment.
Indicates damage: the product or the environment may
be damaged.
Symbols
If this information is disregarded, the product
cannot be used or operated optimally.
2

Notes on Safety

About this section
The CD01-PA valve system has been manufactured
according to the accepted rules of current technology.
Even so, there is risk of injury and damage to equipment if
the following chapter and safety instructions of this
documentation are not followed.
O Read these instructions completely before working
with the CD01-PA.
O Keep these instructions in a location where they are
accessible to all users at all times.
O Always include the operating instructions when you
pass the CD01-PA valve system on to third parties.
Intended use
The CD01-PA valve system is a pneumatic device with
electrical control. It is used to distribute stored pressure
energy to specific system parts in a targeted manner. The
CD01-PA valve system has a modular design. In
accordance with ISO 15407-1, a maximum of 16 valves
with a width of 26 mm may be used in one valve system.
Air that is dry and free of condensate is the permissible
medium. Operation with pure oxygen is not permitted.
O The CD01-PA valve system is only intended for
industrial applications.
An individual license must be obtained from the authorities
or an inspection center if the CD01-PA valve system is to be
used in a residential area (residential, business, and
commercial areas). In Germany, these individual licenses are
issued by the Regulating Agency for Telecommunications
(Regulierungsbehörde für Telekommunikation).
O The device may only be used within the limits listed in
the technical data and on the rating plate.
O Only use the CD01-PA valve system inside.
Intended use includes having read and understood these
instructions, especially chapter "2 Notes on Safety".
CAUTION
NOTICE
13