General Instructions On Equipment And Product Damage; Delivery Contents; Device Description - Aventics CD01-PA Betriebsanleitung

AVENTICS | CD01-PA | R499050037–BAL–001–AH | English
Danger of burns caused by hot solenoid coils!
Touching the solenoid coils during operation may lead
to burns.
O Do not touch the device during operation.
O Let the device cool off before working on it.
Improperly laid cables!
Danger of injury!
O Lay the cables so that no one can trip over them.
Obligations of the system owner
As the owner of a system that will be equipped with this
product, you are responsible for
W
ensuring intended use,
W
ensuring that operating employees receive regular
instruction,
W
ensuring that the operating conditions are in line with
the requirements for the safe use of the product,
W
ensuring that the cleaning intervals are specified and
complied with,
W
ensuring the observance of ignition hazards that
develop due to the installation of system equipment,
W
ensuring that no unauthorized repairs are attempted if
there is a malfunction,
W
ensuring that there is sufficient lightning protection,
W
ensuring that the assembly guidelines for explosion-
proof components and devices are complied with
(e.g. EN 60079-14, EN 61241-14).
Warning sign on the valve system
O Note the information on the warning sign on the valve
system (see ):
3
W
Do not open under power!
W
Danger of electrostatic charge! Only clean with a damp
cloth!
Identification on the rating plate
Figure 4 includes an example of a rating plate.
1 AVENTICS logo
DE-30880 Laatzen
2 AVENTICS part number
3 DÜRR part number
4 Max. working pressure
5 ATEX symbol
6 ATEX identification
1)
The year of manufacture (YY) and the calendar week (WW) are
coded in the date of manufacture.
CAUTION
7 Manufacture date (FD)
with format "FD:
1)
<YY>W<WW>"
8 CE mark
9 Country of manufacture
10 Product designation
11 Internal factory
designation
3 General Instructions on
Equipment and Product
Damage
Damage to the device!
Mechanical loads such as impacts, deflection, or torsion
may damage the device.
O Make sure that no mechanical loads are placed on
the valve system.
O Never load the valve system with external forces.
Damage to the housing or seals caused by fluid or
corrosive media!
Non-compliance with protection class IP 54.
O Avoid contact between external liquid or corrosive
media and the device.
4

Delivery Contents

The delivery contents include:
W
1 valve system, CD01-PA series, in acc. with configuration
W
1 set of operating instructions
The CD01-PA valve system is individually
configured. You can find the exact configuration
in the AVENTICS product configurator under your
material number.
5

Device Description

1 Left end plate
2 Intermediate plate
3 Right end plate
4 Sensor connection
NOTICE
2
5 Contact bridge
6 Valve
7 Electrical connection for
contact bridges with bus
coupler
15