Notes On Safety - Aventics NL1 Betriebsanleitung

AVENTICS | NL1 / NL2 / NL4 / NL6 | R412015554–BAL–001–AD | English
English
1 About This Documentation
These instructions contain important information for the
safe and appropriate assembly and commissioning of the
product.
O Read these instructions carefully, especially the
chapter "Notes on Safety", before you start working
with the product.
Additional documentation
O Read and follow the operating instructions for
maintenance units NL1/NL2/NL4/NL6.
O Also follow the instructions for the other system
components.
O Furthermore, observe general, statutory and other
binding rules of the European and national laws, as
well as the valid regulations in your country to protect
the environment and avoid accidents.
Presentation of information
Safety instructions
In this document, there are safety instructions before the
steps whenever there is a danger of personal injury or
damage to equipment. The measures described to avoid
these hazards must be observed.
Structure of safety instructions
Hazard type and source
Consequences of non-observance
O Measures to avoid hazards
Meaning of the signal words
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injuries.
Symbols
Operation may be impaired if this information is
disregarded.
SIGNAL WORD
WARNING
CAUTION
2

Notes on Safety

The product has been manufactured according to the
accepted rules of current technology. Even so, there is a
risk of injury or damage if the following general safety
instructions and the specific warnings given in these
instructions are not observed.
O Read these instructions completely before working
with the product.
O Keep these instructions in a location where they are
accessible to all users at all times.
O Always include the relevant operating instructions
when passing the product on to third parties.
Intended use
The product is exclusively intended for installation in a
machine or system or combination with other components
to form a machine or system. The product may only be
commissioned after it has been installed in the machine/
system for which it is intended.
Use is permitted only under the operating conditions and
within the performance limits listed in the technical data.
Only use compressed air as the medium.
The product is technical equipment and is intended for
professional use only.
Intended use includes having read and understood these
instructions completely, especially chapter "Notes on Safety".
Personnel qualifications
All tasks associated with the products require basic
mechanical, electrical, and pneumatic knowledge, as well
as knowledge of the respective technical terms. In order to
ensure operational safety, these tasks may only be carried
out by qualified personnel or an instructed person under
the direction of qualified personnel.
Qualified personnel are those who can recognize possible
hazards and institute the appropriate safety measures,
due to their professional training, knowledge, and
experience, as well as their understanding of the relevant
conditions pertaining to the work to be done. Qualified
personnel must observe the rules relevant to the subject
area and have qualifications according to TRBS 1203.
General safety instructions
W
Observe the valid local regulations to protect the
environment in the country of use and to avoid
workplace accidents.
W
Only use AVENTICS products that are in perfect
working order.
W
Examine the product for obvious defects, such as
cracks in the housing or missing screws, caps, or
seals.
W
Do not modify or convert the product.
W
The warranty will not apply if the product is incorrectly
assembled.
5