Symbols Description - PANCONTROL PAN Profimeter Bedienungsanleitung


Before each measurement, check the function on a reliably functioning
voltage source.

Avoid voltage measuring in electrical circuits while motors are switched
on or off. The stress-spikes can damage the instrument.

4. Symbols Description

Conforms to the relevant European Union directive
(EN-61010)
Product is protected by double insulation
Risk of Danger. Important information See instruction
manual
Hazardous voltage!
This product should not be disposed along with
normal domestic waste at the end of its service life
but should be handed over at a collection point for
recycling electrical and electronic devices.
The device is designed for making measurements in
building installations. Examples are measurements on
CAT III
junction boards, circuit breakers, wiring, switches,
permanently installed sockets, devices for industrial
use as well as permanently installed motors.
600 V
max. voltage to earth 600 V (AC / DC)
FUSED
Fused current measuring range (600 mA / 10 A)
Battery compartment
Ground / Earth
25
English