PANCONTROL PAN Profimeter Bedienungsanleitung Seite 24


The device may not be used if the housing or the test leads are damaged,
if one or more functions are not working, if functions are not displayed, or
if you suspect that something is wrong.

If the safety of the user cannot be guaranteed, the device may not be
operated and secured against use.

While using this device, hold the test leads only behind the finger guards -
do not touch the probes.

Never ground yourself while making electrical measurements. Do not
touch any exposed metal pipes, fittings etc., which could have a ground
potential. Ensure that your body is isolated by using dry clothes, rubber
shoes, rubber mats or other approved insulation materials.

Operate the device in a way that it is not difficult to operate the network
separators.

Always adjust the rotary switch to the desired measuring range before
starting the measurement and engage the switch in the proper measuring
range.

If the measuring range needs to be changed during the measurement,
remove the probes from the circuit first.

Never connect the device to voltage or current sources that exceed the
specified maximum values.

Never connect the test leads of the device to a voltage source, if the
rotary switch is set to measure current, resistance or test diodes. This can
damage the device.

If the battery symbol appears in the display, replace the battery
immediately.

Always switch off the appliance and remove the test leads from all voltage
sources before opening the device to exchange the battery or the fuse.

Never use the device with the rear cover removed or with the battery and
fuse compartment open!

Do not use the device outdoors, in humid surroundings or in
environments that are subjected to extreme temperature fluctuations.

Do not store the device in places which are exposed to direct sunlight.

Remove the battery if the device is not used for a long time.

If changes or modifications are made to the device, the operational safety
is no longer guaranteed and the warranty becomes void.
24
English