Uncoded Messages - Georg Fischer Piping Systems MSA Plus 400 Betriebsanleitung

6 Error Messages
30
6.2

Uncoded Messages

Display
MEMORY CARD IS MISSING
NO MSA MEMORY CARD
MEMORY CARD WRITE PROTECTED Remove write-protection
MC CHECK SUM ERROR
MEMORY CARD FULL
MEMORY FULL UNIT BLOCKED
MEMORY CARD WRITING ERROR
MEMORY CARD HAD BEEN REMOVED Protocol record card was removed
WRONG MEMORY CARD VERSION
BARCODE READER NOT
RECOGNISED
WRONG BARCODE TYPE
FUSION PROGRAM INCORRECT
UNKNOWN BARCODE
CONFIGURATION ERROR
RESISTANCE MEASUREMENT ERROR Disconnect MSA Plus 400 and fitting
SERVICE NECESSARY
SERVICE NECESS. UNIT BLOCKED
NO RECORDS EXISTING
FUSION RECORD NOT STORED
OPERATOR: INVALID FOR MSA
OPERATOR: EXPIRED
IDENTITY WITHOUT MSA PERMISSIONUse identification which allows
PROCESSS CONTROL ERROR
ERROR OPERATOR CONFIGURATION Send MSA Plus 400 for servicing
ERROR: INTERNAL MEMORY (SPS)
(10.07)
Operating instructions MSA Plus 400
Comments
Switch off MSA Plus 400, insert
Protocol record card
Re-format Protocol record card with
MSA WIN-WELD
Re-format Protocol record card with
MSA WIN-WELD
Store Protocol record card content
on another medium and erase
Store Protocol record card content
on another medium and erase
Use another Protocol record card
after the last operation
Re-format Protocol record card with
MSA WIN-WELD
Switch off MSA Plus 400, connect
barcode reader
Enter barcode with the correct menu
open
Use a barcode from the standard
ISO/TR 13950
Use a MSA barcode
Send MSA Plus 400 in for servicing
from the generator, check the
connection
Send MSA Plus 400 in for servicing
soon
Send MSA Plus 400 in for servicing
Print later when the fusion operations
have been recorded
Switch off MSA Plus 400, insert new
Protocol record card
Enter valid identification
Enter valid identification
access to MSA
If this occurs frequently, send the
MSA Plus 400 for servicing
Send MSA Plus 400 for servicing
MSA Plus 400_e.doc