Introduction; Validity; Product Description - Georg Fischer Piping Systems MSA Plus 400 Betriebsanleitung

Operating instructions MSA Plus 400

1 Introduction

1 Introduction
Dear Customer,
Thank you for choosing this product. We are confident you will be completely
satisified with its performance.
This electrofusion control unit sets new standards by combining a very low
weight with a high level of performance. We have put utmost care into the
development, manufacturing and inspection of this product, thus ensuring its
efficiency and user-friendliness.
For your own safety, please carefully study these instructions concerning
appropriate use of the product and how to avoid unnecessary accidents.
Thank you.
1.1

Validity

These Operating Instructions are valid for the MSA Plus 400 series beginning
with unit number 20 000 and Softwareversion 2.0. The unit number is located
on the identification plate on the right-hand side of the unit.
1.2

Product Description

The MSA Plus 400 is an electrofusion control unit for the electrofusion jointing
of polyethylene pipes.
Fusion programming of fittings can be accomplished with a fusion barcode
Interleaved 2/5 according to ISO/TC138/SC5/WG12.
All relevant data for fusion and tracing back past operations are stored twice in
the MSA Plus 400 and can be retrieved for evaluation or further processing in a
variety of ways.
The MSA Plus 400 can be specially configurated for different purposes.
(See chapter «Configuration»)
(10.07)
MSA Plus 400_e.doc
1