Choose Language; Setting Display Contrast; Enter Installation Company - Georg Fischer Piping Systems MSA Plus 400 Betriebsanleitung

3 Additional Functions
14
3.8

Choose Language

The display language of the unit can be changed during operation
LANGUAGE:
MNU MNU
Press RIGHT repeatedly until the desired language appears. There is no need
to press ENTER to confirm.
3.9

Setting Display Contrast

The display contrast can be changed.
CONTRAST
MNU MNU
Press RIGHT to enter the editing mode. Press UP and DOWN to adjust the
contrast. Press ENTER to confirm.
3.10

Enter Installation Company

It is possible to define the installation company or the machine owner (up to 16
characters). The input can be entered manually or with a barcode reader. To
enter with a barcode reader, the input text must be available as barcode 128.
MACHINE OWNER:
ABC1
UP DWN
The position where the cursor is is the position that can be edited. With the
LEFT and RIGHT buttons, the position of the cursor is changed and with the
UP / DOWN buttons, the required number can be selected. Confirm with the
ENTER button.
ABC1
NR. OK?
UP DWN
The installation company remains until the next alteration and is stored on the
machine.
(10.07)
Operating instructions MSA Plus 400
GB
PRV NXT
EDT
LFT RGT ENT
<YES>
LFT EDT ENT
MSA Plus 400_e.doc
MSA Plus 400
CF
GB 14:20
03-06-2007
MSA Plus 400
CF
GB 14:20
03-06-2007
MSA Plus 400
CF
GB 14:20
03-06-2007
MSA Plus 400
CF
GB 14:20
03-06-2007