Configuration - Georg Fischer Piping Systems MSA Plus 400 Betriebsanleitung

4 Configuration

18
4 Configuration
Press UP or DOWN to switch to the configuration menu. The current
configuration is displayed.
CONFIGURATION
20 / 40 / 51 / 60 / 80
MNU MNU
4.1 Date and Time Z5, Z50, Z51
The date and time can be adjusted with the date barcode (Z5).
Read in barcode Z5.
> 12:07
03-06-2007
MNU MNU
Press RIGHT to activate the editing function. The point at which the cursor
stands can now be edited. Press RIGHT and LEFT to change the cursor
position, press UP and DOWN to select the desired figures. Press ENTER to
confirm.
> ?2:07
03-06-2007
MNU MNU
Press DOWN to enter date.
Edit and enter the figures as described above.
To confirm, press ENTER.
To programme the unit to automatically switch over to daylight saving time use
the barcode «Automatic Daylight Saving Time» (Z51). As the date of change is
not standardized in all countries, the unit may switch over several days earlier
or later.
The barcode «Manual Daylight Savings Time» (Z50) allows the time change to
be entered manually.
(10.07)
Operating instructions MSA Plus 400
LFT RGT ENT
LFT EDT ENT
LFT RGT ENT
MSA Plus 400_e.doc
MSA Plus 400
CF
GB 14:20
03-06-2007
MSA Plus 400
CF
GB 14:20
03-06-2007
MSA Plus 400
CF
GB 14:20
03-06-2007