Query Infotext; Query Traceability; Enter Fusion Data Manually - Georg Fischer Piping Systems MSA Plus 400 Betriebsanleitung

3 Additional Functions
12
3.4

Query Infotext

If the configuration «Query Infotext» (Z43) is activated, the display will ask the
operator to enter the text after entering the fusion data:
1.
ABC
UP DWN
2.
ABC
UP DWN
The point at which the cursor stands can be edited. To change the position
press RIGHT and LEFT, select the desired figures with UP and DOWN. Press
ENTER to confirm.
3.5

Query Traceability

If the configuration «Query Tracability» (Z44) is activated, the display will ask
the operator to enter the traceability data from the job traceability barcode:
TRACEABILITY
DATA:
FITTING
UP DWN
3.6

Enter Fusion Data Manually

If «Enter Fusion Data Manually» (Z30) is configured, the operator has the
option of giving in the fusion data by hand.
In the «Fusion Data» menu, press DOWN to enter fusion data manually. The
cursor is on «fusion voltage». This value can now be entered.
> 39.5V
0000s
MNU MNU
Press RIGHT to activate the editing function. The point at which the cursor
stands can now be edited. To change the position press RIGHT and LEFT,
select the desired figures with UP and DOWN. Press ENTER to confirm.
(10.07)
Operating instructions MSA Plus 400
LFT EDT ENT
LFT EDT ENT
LFT EDT ENT
PRV EDT ENT
MSA Plus 400_e.doc
MSA Plus 400
CF
GB 14:20
03-06-2007
MSA Plus 400
CF
GB 14:20
03-06-2007
MSA Plus 400
GB 14:20
03-06-2007
MSA Plus 400
GB 14:20
03-06-2007