Print Protocol - Georg Fischer Piping Systems MSA Plus 400 Betriebsanleitung

5 Protocol
Note
Print Collective
Protocols
26
START
STOP
MNU MNU
•
This menu appears only, if a formatted USB Memorystick are present. (it
appears USB in the 2. Line)
Set the starting position with the UP / DOWN buttons, beginning with the
highest number. Confirm the starting position with the ENTER button. The
input of the stop position is done the same way. Auto. repeating by continuous
pressing of UP / DOWN buttons. To export the protocols, confirm with the
ENTER button.
5.4

Print Protocol

Plug in the printer cable in designated socket.
The MSA Plus 400 must be switched off or Standby-Mode when Cable and
memory media are inserted or removed.
Switch the MSA Plus 400 on
MSA Plus
PRINT SPS
MNU MNU
PRINT SPS
FUSION NO
MNU MNU
Press DOWN or UP to select the print function. It is possible to print the
contents of the CompactFlash-card and the back-up fusion record memory
(SPS) following the fusion numbers or job number.
Press DOWN to select Collective Record. Press ENTER to confirm.
PRINT
COLLECTIVE RECORD
MNU MNU
(10.07)
Operating instructions MSA Plus 400
17/20003
1/20003
ENT
ENT
ENT
ENT
MSA Plus 400_e.doc
MSA Plus 400
CF/USB
GB 14:20
03-06-2007
MSA Plus 400
CF/PR
GB 14:20
03-06-2007
MSA Plus 400
CF/PR
GB 14:20
03-06-2007
MSA Plus 400
CF/PR
GB 14:20
03-06-2007