Operating instructions MSA Plus 400
2.7
Protocol Display
After the operation data has been stored, the protocol and the remaining
cooling time are displayed alternately.
GF I *
OK
38s
UP
DWN
COOLING TIME IN
MINUTES:
UP
DWN
If no cooling time is required by the fusion program of the fitting, only the
protocol will be displayed.
When the cooling time is over, the external fitting clamp can be removed.
2.8
Standby Mode
By pressing the STOP button for one second, the machine goes into Standby
mode from most operational stages.
MSA Plus 400
In standby mode, the following operations are possible:
•
Changing a CompactFlash-Card
•
Exchange of a formatted USB-memory stick for fusion data
•
Exchange of an USB-memory stick with language files
Reading in the language data has to be done in the menu 'Service'
–
•
Connecting or removing of interface- or printer cables
By pressing the STOP button, the standby mode is cancelled and normal
operational mode restarted.
(10.07)
2 Operation with Standard Configuration
32mm
N
15/20003
7.41kJ
LFT
RGT
ENT
10
LFT
RGT
ENT
MSA Plus 400_e.doc
MSA Plus 400
GB
14:20
03-06-2007
MSA Plus 400
GB
14:20
03-06-2007
START
7