Biddle CA Anleitung Seite 32

3.3 Installer's level
N . F
O UNCTION
51 Working of the room temperature
control
See also section 3.4.
52 Working of the external-control input
in the control panel
32
3.3.1 Required settings
If external controls are used
The external control settings (function nos. 60 and 61) must
always be performed during installation (see section 3.5).
Other situations
The settings at the installer's level are optional. In most situa-
tions, the default settings will do.
3.3.2 Changing settings at the installer's level
Switching from user's level to installer's level
• Hold both the
three seconds.
The text appears in the display. You are now at
the installer level.
Operation at the installer's level
Selecting functions, changing values, and returning to the user's
level are all done in the same way as at the manager's level
(see section 3.2.2).
3.3.3 Functions at the installer's level
O
PTIONS
0 = no control
1 = control is based on air inlet temperature
(default value)
2 = control is based on temperature reading
of control panel
See section 3.5.3.
BMS M
key and the key pressed for
ODULE
Y
OUR
-
SET
TING