Biddle CA Anleitung Seite 31

M
ANUAL
N . F
O UNCTION
2 Reading or resetting the filter service
life
Use this function when replacing or
cleaning the filter: see section 4.1.
3 Maximum filter life
(service life, on expiry of which filter
is considered dirty)
See also section 4.1.
4 Enable/disable tracking and displaying
of the filter service life
See also section 3.4.1.
5 Room temperature control set point
See also section 3.4.
9 Adjusting the control panel tempera-
ture reading
Use this function if the displayed room
temperature differs from the actual
temperature due to unfavourable
position of the control panel.
10 Reading or deleting current faults
See also section 5.3.
11 Default settings at the manager's level
Version: 4.0 (10-11-2011)
O
PTIONS
The service life is expressed in weeks.
Resetting after replacing or cleaning:
• press and simultaneously
You return to the user's level immediately.
Pre-settable between 1 and 52 weeks.
(default value = 8 weeks)
0 = disable tracking and displaying
1 = enable tracking and displaying (default
value)
Pre-settable between 15 and 30 °C
(default value = 25 ºC)
Pre-settable between -3 and +3 °C
(default value = 0 ºC (no adjustment))
Browsing and reading list:
• press or
Deleting faults:
• press and simultaneously
You return to the user's level immediately.
dF = all functions have default values
-- = there are functions with deviating values
To restore all settings to their default values:
• press and simultaneously.
• press for 3 seconds
Function nos. 2 and 10 are not affected.
Y
OUR
-
SET
TING
X
X
X
31