Biddle CA Anleitung Seite 38

O
PTIONS
F . 60
UNCTION NO
NORMALLY NORMALLY
OPEN CLOSED
- 71
• Normally open: The signal comes in when the contact is closed.
• Normally closed: The signal comes in when the contact is broken.
38
W
ORKING OF THE INPUT
EFFECT ON
INCOMING SIGNAL
The air curtain is or continues to
be switched On. You can switch it
Off using the key.
Function no. 61 52 must be set at value 0 (default value).
n
Note:
When using the "Normally Closed" settings 52, 53 en 71 in
function 60 a bridge has to be made on the input of all
other units.
3.5.5 Particulars of the outputs
Options and operation
The working of the outputs depends on the setting of func-
tion no. 61 at the installer's level. The options are listed in the
table in section 3.5.6.
The functions of the two outputs cannot be set individually.
Multiple units operated from one single control panel
The output has always a global effect: the signals are always the
same in all units connected to the control panel.
BMS M
EFFECT ON
RELEASED SIGNAL
The air curtain is or continues to
be switched Off. You can switch it
On using the key.
ODULE