Changing Water Filter - Coffeemaxx Premium Gebrauchsanleitung

5. The brewing or grinding procedure now starts at the set time.
Tip: You can also start the grinding or brewing procedure at any time before the set
starting time. To do this, press the Programm button once to switch off the timer
and then press the An/Aus button to start the grinding or brewing procedure
manually.
6. After the brewing procedure, you can take the glass pot from the hotplate and serve the
coffee.
7. After the brewing procedure, the hotplate remains on for another two hours and then
switches off automatically.
8. If you would like to turn off the coffee machine before the two hours are up, press the
An/Aus button.
9. Clean the device after use as described in the "Care and Descaling" section.

Changing Water Filter

To produce a more aromatic coffee flavour, the device has a water filter which is inserted
in the water reservoir. If the
replaced. You can order new water filters in our online shop (see "Ordering Replacement
Parts" section).
1. Open the water reservoir cover and pull out the water filter by its bracket.
5. To delete the
2-12 Tassen button simultaneously.
The absence of a water filter does not stop the device from working properly.
01113_DE-GB-FR-NL_V2.indb 25
symbol is shown on the display, the water filter should be
2. Open the lower part of the water filter bracket, take out the
water filter and dispose of it.
3. Insert a new water filter and then close the water filter
bracket again.
4. Place the water filter bracket back into the water reservoir.
Make sure that the water filter is seated correctly in the slot
in the water reservoir.
symbol on the display, press the Kaffeestärke button and the
25
11.02.11 08:18