Herunterladen Inhalt Inhalt Diese Seite drucken

Health-Specific Safety Instructions; Setup And Connection - Coffeemaxx Premium Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

❐ Danger of burns! Parts of the product (e.g. hotplate and glass pot) will become very hot
during use. Avoid coming into contact with hot parts of the device.

Health-Specific Safety Instructions

❐ Damage to health as a result of contamination! Clean the device before using it for the
first time It is possible that manufacturing residues may still be adhering to the surfaces.
It is essential that you follow the cleaning instructions as explained in the section entitled
"Care and Descaling".

Setup and Connection

❐ The device should only be used in closed rooms.
❐ Always place the device on a dry, level, firm and heat-resistant surface.
❐ Maintain a sufficient distance from heat sources such as hobs or ovens in order not to
damage the device.
❐ The device should only be connected to a properly installed socket with earthing con-
tacts. The socket must also be readily accessible after connection. The mains voltage
must be the same as that stated in the technical data of the device. Only use suitable
extension cables whose technical data is the same as that of the device.
❐ Ensure that it is not possible for others to trip over the connected mains cable. Do not
allow the cable to hang over the edge of tables or kitchen counters. Others may become
caught and pull the device down.
❐ Position the cable in such a way that it does not become squashed or bent and does not
come into contact with hot surfaces.
use
❐ Always check the device for damage before putting it into operation. If the device, lead
or plug shows visible signs of damage, the device must not be used. Do not use the de-
vice if it has malfunctioned or been dropped.
❐ If the device is broken, do not attempt to repair it yourself. In the event of damage,
please contact our Customer Service department (see the "Customer Service" section).
❐ Remove the mains plug from the mains socket
– if you are not going to use the device over a longer period of time
– if a fault occurs during operation
– before a thunderstorm
– before you clean it.
❐ When you want to remove the mains plug from the socket, always pull the plug and not
the cable.
❐ Never immerse the device in water or other liquids. Ensure that the device, lead or plug
do not fall into water or become wet. Should the device fall into water, switch off the
power supply immediately.
❐ Please make sure that no water gets into the grinding mechanism of the device.
❐ Never touch the device, cable or plug with wet hands.
01113_DE-GB-FR-NL_V2.indb 18
18
11.02.11 08:18

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis