Changing The Water Filter; Descaling The Device - Coffeemaxx Premium Thermo Plus Gebrauchsanleitung

Changing the Water Filter

To produce a more aromatic coffee fl avour, the device has a water fi lter which is inserted in
the water reservoir. If the
water fi lter should be replaced. You can order new water fi lters in our online shop (see the
"Ordering Replacement Parts" chapter).
1. Open the water reservoir cover and pull out the water fi lter by its bracket.
2. Open the lower part of the water fi lter bracket, take out the water
3. Insert a new water fi lter and then close the water fi lter bracket again.
4. Place the water fi lter bracket back into the water reservoir. Make
5. To delete the
The absence of a water fi lter does not stop the device from working properly.

Descaling the Device

If the water only runs very slowly through the device or the device is louder than usual during
the brewing procedure, you should descale it.
1. Pour the mixture of water and descaling agent into the water reservoir and switch on the
device. Pay attention to the directions for use of the descaling agent in regard to the ratio
of water to descaling agent.
2. Let the mixture run through the machine completely. Repeat this procedure if the water
still runs through slowly.
3. After descaling, let water (without coffee) run through the device at least three times to
fl ush the lines etc.
4. Please ensure that you have switched on the Mahlen Aus function if you want to fl ush
the device with water or descale it.
01429_DE-GB-FR-NL_V2.indb 27 01429_DE-GB-FR-NL_V2.indb 27
symbol and the word "FILTER" are shown on the display, the
fi lter and dispose of it.
sure that the water fi lter is seated correctly in the slot in the water
reservoir.
symbol on the display, press the Kaffeestärke
button and the 2–10 Tassen button simultaneously.
27
14.05.12 10:10 14.05.12 10:10