Changing The Water Fi Lter - Coffeemaxx Aroma Plus Gebrauchsanleitung

Tip: You can also start the grinding and/or brewing process any time before the set
time is reached. To do so, push the AUTO button once to deactivate the timer and
check whether the settings are correct. Push the An/Aus (On/Off) button to manu-
ally start the grinding and/or brewing process.
7. Once the brewing process is complete, a beep is emitted and the coffee cup symbol will
blink on the display. Please keep in mind that the brewing process is only complete when
no more water fl ows out of the spout!
8. After the brewing process, you can take the glass pot off of the heating plate and serve the
coffee.
9. The heating plate will stay on for 2 hours and then automatically deactivate. The coffee cup
symbol blinks continually on the display during this time. When the heating plate turns off,
you will hear a signal tone and the coffee cup symbol will disappear from the display.
10. If you would like to turn off the coffee maker before the 2 hours have passed, push the An/
Aus (On/Off) button.
11. After use, clean the device as described in the chapter "Care and decalcifying".
Changing the water fi lter
The device has a water fi lter inserted in the water tank for more fl avourful coffee. The water
fi lter should always be replaced when the following symbol appears on the display:
You can purchase new water fi lters in our webshop (see chapter "Subsequent ordering").
1. Open the water tank cover and pull the water fi lter out by its holder.
(Illustration similar)
The device will function fi ne even if no water fi lter is in place. You can also use the
device without the water fi lter.
2. Open the bottom part of the water fi lter holder, remove the
water fi lter and dispose of it.
3. Insert a new water fi lter and close the water fi lter holder.
4. Place the water fi lter holder back in the water tank. Make sure
that the water fi lter is correctly seated in the recess provided
in the water tank.
5. To delete the symbol from the display, push the button
Mahlen Aus (Grinder off) and the button Programm
(Programme) at the same time.
25