Before Initial Use; Unpacking; Cleaning; Use - Coffeemaxx Premium Gebrauchsanleitung

Before Initial use

Before you can use the device, you must:
• unpack the items supplied,
• clean the device.

unpacking

PlEaSE notE!
❐ Keep children and animals away from the packaging material. There is a danger of suf-
focation!
Unpack all parts and check the scope of supply for completeness (see "Scope of Supply" sec-
tion); also check for transport damage. If you find any damage to the components, do not use
them (!), but contact our customer service department.

Cleaning

PlEaSE notE!
❐ Do not use corrosive or abrasive cleaning agents to clean the device. These could dam-
age the surface.
1. Press the button for unlocking the filter compartment on the side of the device.
2. Remove the filter compartment insert together with the permanent filter.
3. Now clean the filter compartment insert and permanent filter with hot water and a little
detergent if necessary.
4. Then dry all parts thoroughly and place them in the coffee machine again.
5. We recommend that, prior to first use, you operate the device three times with just wa-
ter (no coffee) to flush through all the lines etc. Please ensure that you have switched on
the Mahlen Aus function if you want to flush the device with water. Before first using
the device, also observe the notices in the "Use" section.

use

PlEaSE notE!
❐ The device has no automatic water-dosing function. Therefore, fill only as much water as
you need into the water reservoir.
❐ Make sure that the filter cover is placed on correctly as otherwise the device will not
start the brewing procedure!
❐ Make sure that the maximum marking of the water level indication is not exceeded when
you pour water into the water reservoir of the device.
Take care when pouring in water: To make it impossible to overfill the water reservoir,
there is an opening on the back of the water reservoir from which excess water can
escape.
01113_DE-GB-FR-NL_V2.indb 22
22
11.02.11 08:18