Home Button - Singer SE300 Montageanleitung

E
MBROIDERY
CAUTION
HOME SCREEN / HOME BUTTON
H S (A)
OME CREEN
When you have attached the embroidery unit correctly, the
screen.
H B (B)
OME UTTON
pressing the Home Button.
At this time, all selected designs or letters and editing for
embroidery will be cleared.
A
B
P
REPARATION
EMBROIDERY MACHINE SETTINGS
S B (C)
ETTING UTTON
Before or during the embroidery process, you can adjust the
This screen is scrolled by pressing the right side arrow buttons.
previous screen.
NOTE:
All settings except for thread tension will remain until you
change them. Thread tension will return to pre-set when you
load a design.
D
T T (D)
HREAD ENSION
This embroidery machine adjusts thread tension automatically.
However, depending on the thread or fabric being used, it
may be necessary to modify the tension setting to achieve the
desired results.
To obtain the desired thread tension, adjust as follows.
i. CORRECT THREAD TENSION
Upper thread appears slightly on the bottom side of fabric.
ii. UPPER THREAD TOO TIGHT
Bobbin thread appears on the top side of fabric.
button.
iii. UPPER THREAD TOO LOOSE
Upper thread is loose or makes loops.
button.
43
C