Quilting - Singer SE300 Montageanleitung

Attach the left side of the presser foot pin to the presser
foot holder when sewing the right side of the zipper, and
right side of the presser foot pin to the holder when sewing
the left side of the zipper.
5. Turn the fabric right side out stitch across the lower end
and right side of zipper.
the top of the zipper.
7-10 mm
T S A
O TITCH ROUND THE
2. Lower the needle into fabric.
3. Raise the presser foot and slide the zipper tab backwards
4. Lower the presser foot and continue stitching.
5. Remove the basting stitches.
a. Zipper tab
Z T :
IPPER AB
S
EWING

QUILTING

The topper, batting, and backing fabric. The top layer is formed
topper.
Quilting Bar
CAUTION
J
OINING THE PIECES OF FABRIC
Join the pieces of fabric using Pattern No. 0 with a seam
Q
UILTING
hole of presser foot holder and set the spacing as desired.
H L Q
AND OOK UILTING
Use invisible nylon sewing thread or very lightweight thread
that matches the fabric on top. Place thread that contrasts to
maximum or near maximum. When you sew, bobbin thread will
pull to the top and give the appearance of a traditional hand
desired for the look you want to achieve for your project.
30
S (N . 198)
TITCH O