Sequencing - Singer SE300 Montageanleitung

SEQUENCE SEWING
S S P
ELECTING TITCH
The selected patterns will display at the top left side of the
LCD screen.
2. After selecting a stitch, use the same procedure to select
the next stitch pattern. The selected pattern will be added,
and it will display on the left side of the LCD screen below
the previously selected pattern.
NOTE:
combined, a message will appear on screen to
S L S
ELECTING ETTER
button on the LCD screen, which is indicated by a lower
2. Press the left button for the Block font, press the right
highlighted.
✓
Uppercase letter of selected style will appear.
ATTERNS
✓
TITCHES
S
EQUENCING
4. Press the desired letter directly. Press the Character tabs
case, numbers, etc.
a. Uppercase letters
b. Lowercase letters
c. Numeric letters and special letters
screen.
a b c
6. The arrow buttons on top line will move the cursor.
7. To insert the letter, move the cursor to the inserting point
and select letter.
To delete the letter, move the cursor to the right side of the
mark.
e
be shown on the left side of the LCD screen. The cursor may
disappear if the length of letters are over the indicating area.
NOTE:
to proportion automatically.
of 60 patterns and letters. Message will
appear when you reach the limit.
✓" button.
38
✓"
d