Becoming Familiar With Your Carson Nitro Buggy; Chassis - Carson CNB Betriebsanleitung

Becoming familiar with your CARSON Nitro
Buggy
Each radio system comes with a sticker on the back of the
transmitter and on the receiver showing which frequency the
radio system operates on. No two radio systems can operate
nearby each other if they are on the same frequency. You can
purchase transmitter and receiver crystals separately and
change them if you plan on running your Buggy with other
people. We have provided a list of the frequencies that are
available for your radio system.
Antenna:
Transmits the signal from the transmitter to the
receiver. The antenna should be completely extended during
use.
Battery cover:
This cover houses the 8 AA Alkaline
batteries that power the transmitter.
Crystal:
This is the frequency crystal of the
transmitter. You can change crystals in both the
transmitter and the receiver so that you and your friends
can drive at the same time. No two radio systems nearby
can be operated on the same frequency.
On/off switch:
Turns the transmitter on and off.
Servo reversing switches:
easily change the direction the servos rotate by just
flipping the switches.
Steering wheel:
Controls your Buggy's steering. Turn
the wheel to the right and the Buggy turns right. Turn the wheel
to the left and the Buggy turns left.
Steering dual rate control dial:
the overall travel of the steering servo. Push the dial forward for
maximum steering (125%). Pull the dial back to reduce steering
travel (minimum 60%).

Chassis

2-Speed transmission:
The 2-speed transmission automatically shifts from low to high
gear for awesome top speed and features an adjustable shift
point. Tighten the adjustment screw to shift at a higher speed.
Loosen the adjustment screw to shift at a lower speed.
Air filter:
The air filter is made of foam and prevents dirt and debris from
entering the engine through the carburettor. The air filter should
be „wet" with air filter oil for maximum efficiency.
Battery box:
This is where the receiver battery is mounted. The battery box
protects the batteries from dust, dirt and oil. The battery box is
not waterproof.
Body mount:
Made of high-impact nylon plastic for strength, the body
mount secures the body into place.
Engine:
The CARSON CNB Buggy includes the powerful 4.58 cm
FORCE engine with pull-starter and tuned pipe for ease of use
and great performance.
Steering reverse switch
Steering trim dial
Power Switch
LED battery indicator
Throttle reverse switch
Allow you to quickly and
This dial adjusts
Front bumper:
tic, the front bumper protects the chassis from most head-on
impacts.
Fuel tank:
The fuel tank holds the fuel that your engine uses. This fuel tank
includes a fuel pressure nipple that connects to the tuned pipe
to pressurize the fuel system and also features a quick-flip type
lid for fast refueling.
EMS-system:
Used to start the engine.
Shock:
Each shock is oil-filled and uses a spring that is well suited for
most off-road conditions. The shocks feature threaded shock
bodies that allow the shocks to be easily tuned for different
driving conditions. The shocks come standard with 1OO Wt oil
and 1.7 mm springs.
Steering servo:
3 This servo controls the vehicle's steering. A „servo saver" is
used to help prevent the servo gears from being stripped out.
CARSON Nitro Buggy CNB 204016
Antenna
Throttle/brake trigger:
braking ability of your Buggy. Pull the trigger to accelerate,
release the trigger to decelerate, and push the trigger to brake.
Trirn dials:
These dials, one for steering and one for
throttle/brake control, allow you to fine tune the servo's center
by turning the dials on the transmitter back and forth.
Made out of high-impact nylon plas-
Reverse drive switch
Throttle/brake dial
Crystal
Throttle/brake
trigger
Steering wheel
Batterybox
Controls the speed and
9
GB