Force Motor 4.58 Cm - Carson CNB Betriebsanleitung

GB Upgrade tip:
lf you wil be running your Buggy in extremely dusty conditions,
we suggest using a prefilter sleeve over the air filter.
Wet the main filter element as described before, then simply
slide the prefilter sleeve over the main filter. It's not necessary,
nor desirable, to wet the prefilter sleeve.
We suggest using racing 1/8th scale prefilter sleeves
Art.-No. 52175.
e. Force Motor 4,58 cm
It's now time to become familiar with your
engine. This includes how to set the
carburettor, break in the engine and how
to tune it properly. Please read the next
few pages very carefully.
Your Carson CNB Buggy comes equipped with the user-friendly
and powerful Force 28 nitro engine. Before starting the engine
for the first time, you MUST read this section very carefully. This
section details the different parts of the engine's carburretor
and how to adjust the carburretor's needle valves to tune the
Refer to picture 17 familiarize yourself with your engine's
carburretor. All of the carburretor settings come preset from the
factory for initial starting and break-in, but you should have a
small flat blade screwdriver handy to make adjustments to the
carburretor during the break-in process, which will be detailed
in the next section.
Idle stop screw
The idle stop screw adjusts the closure of the carburretor
barrel. We recommend that the idle stop screw be adjusted
so that the carburretor barrel stays open about 1/16" (1 mm).
Turning the screw clockwise will cause the barrel to stay open
more.
Turning the screw counterclockwise will allow the barrel to
close more. lf the carburetor barrel stays open too far, the
engine will idle very high and the clutch will never disengage.
This will damage the clutch very quickly. lf the idle stop screw
is closed too far, the engine may die during idle. Ideally, the
engine should idle smoothly, yet slow enough so that the clutch
stays disengaged.
16 CARSON Nitro Buggy CNB 204016
Picture 16
3
Please read this information
before proceeding!
engine. Failure to read this information may result in your
not knowing how to properly operate your new engine. Not
knowing how to operate your new engine can result in damage
to the engine.
Picture 17
Low speed needle
valve
Idle stop screw
Picture 18
Warning!
High speed
needle valve
1 mm