Inhaltsverzeichnis; Introduction; Intended Purpose - ULTIMATE SPEED UMK 10 A1 Originalbetriebsanleitung

Contents
Introduction ................................. 5
Intended purpose ......................... 5
General description ...................... 6
Extent of the delivery / Accessories .... 6
Overview ........................................ 6
Technical data .............................. 6
Safety information ....................... 6
Symbols used in the instructions ......... 6
Symbols on the appliance ................. 7
General notes on safety .................... 7
Initial Operation ........................... 8
Operation .................................... 9
Operating instructions....................... 9
Air pressure test ............................... 9
Overload fuse................................ 10
Cleaning .................................... 10
Storage ...................................... 10
Disposal/Environmental
protection .................................. 10
Replacement parts /
Accessories ................................ 10
Guarantee ................................. 11
Service-Center ............................ 12
Service Branch ........................... 12
Translation of the original
EC declaration of conformity ...... 53
Exploded Drawing ..................... 55

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
The operating instructions constitute part of
this product. They contain important infor-
mation on safety, use and disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.

Intended purpose

The device is designed to generate pressure
in tyres (e.g. car and bicycle tyres), balls
and other small-volume inflatable items.
The device is not designed for inflating
large-volume items, as the device can quick-
ly heat up if there is no counter-pressure.
This device is not intended for continuous
operation to generate pressure of more than
3 bar.
Any other use that is not explicitly approved
in these instructions may result in damage
to the equipment and represent a serious
danger to the user.
The manufacturer is not liable for damage
which is caused through inappropriate use
or incorrect operation.
The operator or user is responsible for ac-
cidents or damage to other persons or their
property.
This equipment is not suitable for commer-
cial use. Commercial use will invalidate the
guarantee.
GB
5