Page EN-24
Care and maintenance
If the floor brush is no longer
working properly:
1. Remove the floor nozzle (13)
from the tube extension (11) or
from the suction tube (8).
(13)
2. Move the slider (41) on the un-
derside of the floor nozzle (13)
to the "Open" position (towards
the
symbol).
3. Remove the locking latch (42).
(41)
4. Remove the brush (17).
5. Remove any lint and hairs
from the brush (17).
6. Reinsert the brush (17) and
the locking latch (42) and
move the slider (41) to the
"Closed" position (towards the
symbol).
(42)
(17)