hanseatic VC-PD510-1 Gebrauchsanleitung Seite 58

Page EN-26 Troubleshooting table
Problem
Suction force is
weak.
Dust is escap-
ing from the
appliance.
In rare cases this can make a whistling noise initially. This is not
a malfunction and stops after a while.
Possible cause
Nozzle is not positioned
correctly.
Object is plugging the
nozzle.
Filters are inserted incor-
rectly or are contaminated.
Filters are inserted incor-
rectly or are contaminated.
Solutions, tips
Position the nozzle cor-
rectly.
Switch the appliance off
and check the tube exten-
sion for obstructions. Re-
move object.
Insert filters correctly and/
or clean.
Insert filters correctly and/
or clean.