Siemens SITRANS TSinsert Bedienungsanleitung Seite 39

9.5.5 SITRANS TS500, types 4 and 4F
①
Type 4, full material version, with extension
②
Type 4F, full material version, with flange and extension
B Length of measuring insert
C Cone length = U
∅d External diameter of measuring insert (6 (0.24))
∅D External diameter of process connection
∅D1 Internal diameter of tip
∅D2 External diameter of tip
∅D3 Internal diameter of protective tube
∅D4 External diameter of extension
Figure 9-8 Dimensional drawings SITRANS TS500, types 4 and 4F - dimensions in mm (inch)
SITRANS TSinsert/TS100/TS200/TS300/TS500
A5E03920348-04, 09/2013
min
E Thread dimension of process connection
H Height of head
K Penetration depth
L Length of protective sleeve
LE Cable inlet
N Nominal length
U Mounting length
X Extension
39