Energetics ET 620 Aufbauanleitung Seite 13

Step 3 Handle Bar Assembly
1. Install the Lower Handle Bar (L) (9) in the left shaft of Console Mast (11) and the Lower Handle Bar
(R) (10) in the right shaft of Console Mast (11), and secure them with 2pcs of 5/16" × 15m/m Hex
Head Bolts (74) and 2pcs of Ø8.7 × 20m/m × 1.5T Flat Washers (102) by using 12m/m Wrench (116).
2. Release rod end shafts (18) which are on left and right connecting arms. Connect the connecting arm
with lower handle bar and secure with rod end shafts (18) and the screw by using 12m/m_Wrench
(116).
13