Advanced Operation; Setting The Option Menu For Each Input Source (Option Menu); Option Menu Items - Yamaha RX-V2065 Bedienungsanleitung

ADVANCED OPERATION

Setting the option menu for each input source (Option menu)

The Option menu allows users to configure various settings for each input source and reflect corresponding settings
automatically when an input source is switched. Also, you can view the signal information for certain input sources.
The procedure for setting the Option menu items is described below.
1
Rotate the TINPUT selector (or press
dInput selection key) to select the
desired input source.
If you press dUSB/NET on the remote control,
press wSub-input selection key to select a
sub-input source.
2
Press sOPTION on the remote control.
Option Menu
Volume Trim
Decoder Mode
Extended Surround
Signal Info
HDMI 1
Input
Straight
DSP
3
Press jCursor k / n to select the desired
menu item and then press jENTER.
4
Press jCursor k / n / l / h to select the
desired setting and then press jENTER
5
To exit the Option menu, press sOPTION.
To return to the previous menu, press jRETURN.
Note
• In case jCursor k / n / l / h or other keys do not work after
closing the Option menu, press dInput selection key to
select the current input source again.

Option menu items

The following menu items are provided for each input
source.
Input source
HDMI1-4 Volume Trim, Decoder Mode,
AV1-4 Extended Surround, Signal Info
*1
V-AUX
AV5-6
Volume Trim
PHONO
AUDIO1/2 Volume Trim, Video Out
MULTI CH
*2
iPod (DOCK) Volume Trim, Shuffle, Repeat
NET RADIO (USB/NET) Volume Trim, Signal Info
USB (USB/NET) Volume Trim, Signal Info, Shuffle,
Repeat
PC (USB/NET) Volume Trim, Signal Info, Shuffle,
Repeat, Refresh
Notes
*1
*2
Details of the menu items are as follows. The
configuration will be reflected to the input source
currently selected.
y
• The default settings are marked with "*".
Volume Trim
Input source:
Adjustable range: –6.0dB to 0.0dB* to +6.0dB
Reduces any change in volume when switching input
sources by correcting volume differences between input
sources.
Decoder Mode
Input source: HDMI1-4, AV1-4, V-AUX
Choices:
Selects DTS digital audio signals for reproduction.
Auto
DTS
Extended Surround
Menu items
Input source: HDMI1-4, AV1-4, V-AUX
Choices:
Selects whether to reproduce multi-channel (or 2-channel)
input signals in 6.1- or 7.1-channel when surround back
speakers are used.
Auto
PLIIx
Movie
Input source
BLUETOOTH (DOCK) Volume Trim, Connect/Disconnect,
Pairing
TUNER Volume Trim, FM Mode, Auto
Preset, Clear Preset, PTY Seek, EON
Only "Volume Trim" is available when no external device is connected
to the HDMI IN jack.
"Shuffile" and "Repeat" are not available during the simple remote
mode.
All
(in 0.5 dB steps)
Auto*, DTS
Automatically selects audio input signals.
Selects DTS signals only. Other input signals
are not reproduced.
Auto*, PLIIxMovie, PLIIxMusic, EX/ES, Off
Automatically selects the most suitable
decoder if a flag for reproducing surround back
channel is present, and reproduces the signals
in 6.1- or 7.1-channel.
Always reproduces signals in 7.1-channel
using the PLIIxMovie decoder whether or not
surround back channel signals are contained.
You can select this parameter when two
surround back speakers are connected.
Menu items
43
En