Advanced Operation; Selecting The Osd Mode; Advanced Operations; Using The Sleep Timer - Yamaha RX-V757 Bedienungsanleitung

ADVANCED OPERATIONS

Selecting the OSD mode

You can display this unit's operating information on a
video monitor. If you display the SET MENU and sound
field program parameter settings on a monitor, it is much
easier to see the available options and parameters than it is
by reading this information on the front panel display.
1
Turn on the video monitor connected to this
unit.
2
Press ON SCREEN repeatedly to change the
OSD mode.
The OSD mode changes in the
following order: full display, short
display, and display off.
Full display
Always shows the sound field program parameter settings
as well as the contents of the front panel display.
Short display
Briefly shows the contents of the front panel display at the
bottom of the screen each time you operate this unit.
Display off
Only operations performed using ON SCREEN are
displayed. The OSD is displayed when using SET MENU,
even if the OSD mode is set to "Display off".
P04 MOVIE THEATER
.
General
DSP LEVEL;;;;0dB
P.INIT.DLY;;15ms
P.ROOM SIZE;;1.0
S.INIT.DLY;;20ms
S.ROOM SIZE;;1.0
Full display
Notes
• The OSD signal is not output to the REC OUT jack, and will
not be recorded.
• You can set the OSD to turn on (gray background) or off when a
video source is not being reproduced (or the source component
is turned off) by using "DISPLAY SET" (see page 64).
• When using component video signals, the "Short display" is not
output to the COMPONENT VIDEO MONITOR OUT jacks.
To display the OSD with component video signal input, set the
OSD mode to "Full display" while GRAY BACK in DISPLAY
SET (see page 64) is set to AUTO.
52
ADVANCED OPERATIONS
ON SCREEN
DISPLAY
P04 MOVIE THEATER
General
Short display

Using the sleep timer

Use this feature to automatically set this unit in the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to AC OUTLET(S).

■ Setting the sleep timer

TRANSMIT
SYSTEM
POWER
A
V-AUX
DTV/CBL
POWER
TV
1
Select a source and start playback on the
source component.
2
Press SLEEP repeatedly to set
the amount of time.
Each time you press SLEEP, the front
panel display changes as shown
below. The SLEEP indicator flashes
while switching the amount of time
for the sleep timer.
SLEEP 120min
SLEEP OFF SLEEP 30min
DVR/VCR2 VCR1 V-AUX
SP
A
The SLEEP indicator lights up in the front panel
display, and the display returns to the selected sound
field program.
DVR/VCR2
VCR1 V-AUX
SP
A
TV Sports
RE-NAME CLEAR LEARN
2
STANDBY SLEEP INPUT MODE
B PHONO MULTI CH IN
TUNER MD/CD-R CD
VCR 1 DVR/VCR2 DVD
SELECT
POWER
AMP
AV
SLEEP 90min
SLEEP 60min
DTV/CBL DVD MD/CD-R TUNER CD
TUNED
HiFi DSP
SLEEP
SLEEP indicator
DTV/CBL MD/CD-R
DVD TUNER CD
TUNED
SLEEP
SLEEP
PHONO
VOLUME
dB
L R
PHONO
VOLUME
dB
L R