Responsibilities Of The User - Abicor Binzel AUTC 61GD Betriebsanleitung

MAG
1 Identification
1.1 CE marking

1.2 Responsibilities of the User

2 Product Description
2.1 Designated Use
2.2 Use contrary to the designated use
The MAG welding torch is used in industry and in the trade for welding using
active gases (MAG). It is available as machine-operated torches and can be
used in all welding positions. These operating instructions describe MAG
welding torches AUTC 61GD, AUT 610D. The MAG welding torches may only
be operated using original ABICOR BINZEL spare parts.
This device fulfils the requirements of the relevant EU directives.
Conformity is confirmed by the CE marking on the device.
Within the EEA (European Economic Area) the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Job
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the welding torches in connection with
welding units comply with the EC EMC Directive (2014/30/EU) and that the
signal utilisation of the integrated welding current monitoring against stray
currents is installed properly.
The MAG welding torch is preferably used for welding of commercially
available round wires in machine.
Designated use also includes the observance of the prescribed operating,
maintenance and servicing conditions.
Any use other than that described under "Designated Use" is considered
contrary to the designated use. Unauthorized conversions or power increase
modifications are not allowed.
1 Identification
EN - 3