Signs And Symbols Used; Scope Of Delivery; Putting Into Operation - Abicor Binzel ABIMIG W Betriebsanleitung

4 Scope of delivery

3.2 Signs and symbols used

Symbol Description
• Bullet symbol for instructions and lists

Cross reference symbol refers to detailed, supplementary or further information
1 Step(s) described in the text to be carried out in succession
4 Scope of delivery

5 Putting into operation

EN - 6
The following signs and symbols are used in the operating instructions:
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be
found in the current product catalogue or the spare parts list supplied. Contact
details for advice and orders can be found online at www.binzel-abicor.com.
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance,
servicing, assembly, disassembly and repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Close the compressed air supply.
• Disconnect all electrical connections.
DANGER
Risk of injury and device damage when handled by
unauthorised persons
Improper repair work and modifications to the product may lead to serious
injuries and damage to the device. The product warranty will be rendered
invalid if work is carried out on the product by unauthorised persons.
• Operating, maintenance, cleaning and repair work must only be carried
out by qualified personnel (in Germany, see TRBS 1203).
NOTICE
• Please take note of the following instructions
 3 Product description on page EN-4
®
ABIMIG
BAL.0085 • 2017-03-02
W