Eu Declaration Of Conformity; Responsibilities Of The User - Abicor Binzel PSB Serie Betriebsanleitung

PSB
1 Identification

1.1 EU Declaration of Conformity

Designation
Relevant EC Directives
Harmonized standard applied
Tab. 1 Information regarding the EU Declaration of Conformity

1.2 Responsibilities of the User

The manual and automatic cutting torches of the PSB series are used in
industry and the trade exclusively for plasma cutting or gouging with
compressed air as the plasma and cooling gas. They consist of the torch neck
with equipment parts and wear parts, handle and cable assembly with direct
connector or central connector. They conform to EN 60 974-7 and are not
considered devices having their own functions. For operation, a cutting power
source is required. The cutting torches may only be operated using original
ABICOR BINZEL spare parts.
according to the EC Directives:
2006/42/EC.
We,
Alexander BINZEL Schweisstechnik GmbH & Co. KG,
Legal representative of the documentation: Hubert Metzger
Kiesacker 7-9, 35418 Alten-Buseck
hereby declare that, on the basis of its design and construction and in the
present version, the product described in these operating instructions complies
with the basic safety and health requirements of the EC directive. Any
modification not agreed with us will void this declaration.
Plasma-Cutting Torches PSB 31/60/121
EC Machinery Directive 2006/42/EC
EN 60974-7, DIN EN ISO 9001
Within the EEA (European Economic Area), the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Labor
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the welding torch and welding unit
comply with the EC EMC Directive (04/108/EC) and that the signal utilization
of the integrated welding current monitoring against stray currents is installed
properly.
1 Identification
EN - 3