Emergency Information - Abicor Binzel AUTC 61GD Betriebsanleitung

4 Components

3.2 Emergency information

4 Components
• MAG welding torches equipped ready for welding including cable
assembly and central connector
Tab. 6 Components
4.1 Transport
Checking procedure on
receipt of goods
In case of damage
In case of complaints
Packaging for
returning the goods
Tab. 7 Transport
4.2 Storage
EN - 6
NOTE
Describes the risk of impairing work results or the risk that may result in
material damage to the equipment.
In case of emergency, immediately interrupt the following supplies:
• Power, Gas
Further measures can be found in the "Power supply" user manual or in the
documentation of further peripheral devices.
The MAG welding torches are delivered as complete unit ready for welding.
The standard scope of delivery includes the following components:
Order the equipment parts and parts subject to wear separately. Order data
and part numbers for the set-up and wearing parts can be found in the current
ABICOR BINZEL spare parts and wearing parts lists.
The contact for consulting and ordering can be found in the Internet at
www.binzel-abicor.com.
The components are carefully checked and packaged, however damage may
occur during shipping.
Make sure that the shipment is complete by referring to the delivery note!
Check the package and components for damage (visual inspection)!
If the goods have been damaged during transport, contact the last carrier
immediately. Keep the packaging (for possible checks by the carrier).
Use the original packaging and the original packaging material.
If you have questions concerning the packaging and safety during
shipment, please consult your supplier.
Physical storage conditions in a closed room:
• Operating instructions
MAG