Frothed Cocoa; Disconnecting; Cleaning Process; Descaling - Princess CAFFÈ ITALIANO Anleitung

Frothed cocoa

Stir instant cocoa powder into fresh milk directly in the suctioning cup (30). After frothing, you can enjoy
a wonderfully light cocoa beverage.

DISCONNECTING

The appliance can be switched off at any time at the on/off button
it will is automatically switch itself off 60 minutes after the last use,. The power consumption is only
0.3 Watts during standby.

CLEANING PROCESS

Clean the appliance, if it has not been used for several days. The content of the heating system is thereby
replaced by tap water.
1. Insert the water tank (4) into the appliance after it has been filled up to the max mark
2. Insert the empty pad cassette (6) and move the rocking lever (5) to
3. Place two cups under the coffee dispenser (3).
4. Switch the appliance on using the on/off button
and 12) briefly.
5. After the pump automatically switches off, set the rocking lever (5) to O.

DESCALING

Scaling indicator

Like all hot water appliances the appliance must be routinely descaled. The automatic scaling indicator
determines the time for the descaling required. Depending on the coffee consumption, you may already
be asked to perform descaling after 6 to 10 weeks by the yellow flashing on/off button
continue to brew coffee and prepare hot water. However, milk frothing is no longer possible.

Hardness range setting

The appliance is preset to very hard water (hardness range 4) as a precaution against excessive scaling.
Request the hardness range in your residential area from your waterworks company or your local authorities.
If it is lower than 4, you can change the setting. You will then no longer have to descale so frequently.
1. Switch the appliance off at the on/off button
2. Press the start/stop button
number of impulses shows the set hardness range.
Flashing signal
• • •
•• •• ••
••• ••• •••
•••• •••• ••••
1° dH corresponds with approx. 0.18 mmol/l Ca- and Mg-Ions
3. Each time you press the start-/stop button
is again followed by range 1, etc.
4. In order to set the new hardness range, press the on/off button
within 10 seconds, the appliance is switched off without changing the setting. You can check the
hardness range at any time by repeating step 1 and 2.

Descaler

The automatic descaling program of your automatic coffee pad appliance is optimized to
be used for a portion (125 ml) of durgol® swiss espresso®.
Therefore only use this product in the specified quantity when descaling the appliance.
Only thus can complete descaling be guaranteed and the material protected during the
brief descaling period. durgol® swiss espresso® was specifically developed for automatic
coffee and espresso machines. It is used undiluted, is highly effective and guarantees a
reliable descaling and therefore a long operational life of the appliance. You can obtain the
descaler from our Service Station.
Never use vinegar or vinegar concentrate since material of the appliance might be
damaged.
(12) (3 to 4 seconds) until the on/off button
Hardness range
1 soft
2 medium
3 hard
4 very hard
(10) and then simultaneously press both buttons (10
(10).
Hardness
0 - 7°dH
> 7 - 14° dH
> 14 - 21° dH
> 21° dH
(12), the setting changes by one range. Hardness range 4
(10) again briefly. if this is not done
(10). If you leave the machine on,
.
(10). You may
(10) flashes yellow. The
.
22