Technical Data - Scheppach CRS450-20ProS Original Bedienungsanleitung

• Do not open up the battery and avoid mechani-
cal damage to the battery. Risk of short circuit
and fumes may be emitted that irritate the res-
piratory tract. Ensure fresh air and seek medical
assistance in the event of discomfort.
• Do not use non-rechargeable batteries. This
could damage the appliance.
Special safety instructions for reciprocating
saws
• Hold the electric tool by the insulated gripping
surfaces when performing work in which the
cutting tool may come into contact with hidden
wiring. Contact with a live wire can also cause a
charge in metal parts of the device and result in an
electric shock.
• Keep hands away from the sawing area. Do not
reach underneath the work piece. Upon contact
with the blade there is a risk of injury.
• Only when the electric tool is turned on should
the sawing blade be moved against the work
piece. There is a risk of kickback if the tool insert
jams in the work piece.
• Make sure that the base plate is securely placed
against the work piece during sawing. The saw
blade can tilt and lead to loss of control over the
power tool.
• After you have finished work, turn the power
tool off and do not pull the saw blade out of the
cut until it has come to a standstill. In this way
you will avoid any kickback and can safely put own
the power tool.
• Use only undamaged saw blades in perfect
condition. Bent or blunt blades can break, ad-
versely affect the cut or cause kickback.
• Do not brake the saw blade after switching the
device off by applying side pressure. The saw
blade may be damaged, break or cause a kickback.
• Tighten the material firmly. Do not support the
work piece by hand or foot. Do not touch any
objects or the ground with the saw running.
There is a risk of kickback.
• Use suitable detectors in order to find hidden
supply lines or ask the local utility company.
Contact with electrical cables can lead to electric
shock and fire, contact with a gas pipe can result in
an explosion. Damage to a water pipe can lead to
property damaged and electric shock.
• Hold the power tool tightly with both hands
while working and ensure a secure footing.
The power tool is guided more securely with both
hands.
• Secure the work piece. A work piece that is re-
tained with clamping devices or a vice is held more
securely than with your hand.
• Wait until the power tool has stopped before
placing it down. The tool insert can tilt and lead to
loss of control over the power tool.
20 | GB
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
• Do not saw any materials (e.g. lead-based
paints and coatings or materials containing as-
bestos) whose dust can be harmful.
Information on the rechargeable battery
Please observe the operating manual for the re-
chargeable batteries.
Information on the charging unit and charging
process
Please observe the operating manual for the charg-
ing unit.
Warning! This electric tool generates an electro-
magnetic field during operation. This field can im-
pair active or passive medical implants under certain
conditions. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool
Residual risks
Even if properly operating and handling this electric
tool, some residual risks will remain. Due to its con-
struction and build, this electric tool may present the
following hazards::
• Lung damage, if suitable respiratory protection is
not worn;
• Cuts;
• Ear damage if working without ear protection;
• Damage to your health caused by swinging your
hands and arms when operating the appliance for
longer periods of time or if the unit is not held or
maintained properly.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the „safety in-
structions" and the „Proper use" are observed
along with the whole of the operating instructions.
• Avoid accidental starting of the machine.
• Use the tool that is recommended in this manual.
This ensures that your machine performs optimally.
• Hands may never enter the processing zone when
the machine is in operation.

6. Technical data

Motor power supply:
Rated speed:
Stroke length:
Weight
Subject to technical changes!
20 V
3000 min-
1
20 mm
2 kg